New 620R Loader

Ag Tractor Loaders
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Automatic Mast Latch for fast implement changeover
  • Repositioned leveling links for better visibility
  • Designed for maximum tractor maneuverability
  • Integrated stands for tool free attachment and removal

More Info

Features

Boom lockout for easy service
Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the R-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Loader options to improve productivity
RTP screen shownRTP screen shown
Hydraulic remote latch shownHydraulic remote latch shown

The R-Series Loaders come with a number of options to enhance an operator’s experience and to allow more productivity in the field. These options include lighting, hydraulic remote implement latch, loader suspension system, and industry-exclusive return-to-position (RTP) Gen2 technology with electronic self-leveling.

 

Loader lights for enhanced visibility in low-light conditions

Hydraulic remote implement latch

Return-to-Position (RTP) Gen2 with electronic self-leveling (ESL)

Loader suspension system for a smoother ride

 

All of these options are powered using a common electrical harness. Features can be added or subtracted to get the job done right.

Single-point hydraulic connection saves time
Single-point hydraulic connection (open)Single-point hydraulic connection (open)
Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

The 620R, 640R, 660R, and 680R Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Concealed oil lines improve appearance and reduce damage
Concealed oil lines through boom arm (H-Series Loader is representative only)Concealed oil lines through boom arm (H-Series Loader is representative only)
#
Oil lines routed through the boom armOil lines routed through the boom arm
Oil lines routed through the torque tubeOil lines routed through the torque tube

Through time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

False rod bucket cylinders improve productivity mechanical self-leveling (MSL) only
False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible (quite often) in order to be as productive as possible while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the MSL loaders. 

 

All MSL R-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Loader removal (parking) made easy
Automatic mast latch systemAutomatic mast latch system
#

R-Series Loaders are now even easier to remove and reinstall due to an automatic mast latch system. Simply exit the tractor once for removal and once for reinstall to reduce the amount of downtime associated with loader parking.

 

For a more detailed look at the steps, please refer to the operator’s manual.


To remove the loader, follow these simple steps:

  • Set the bucket flat on ground, release the hydraulic pressure, and exit the tractor.
  • Set the adjustable parking stands on the ground. 
  • Flip the lock handles located on either mast to unlock the loader from the frames.

  • Disengage the hydraulic couplers and return to the tractor seat.
  • Back away from the loader.

To reinstall the loader follow these simple steps:

  • Drive the tractor into the loader, resulting in mechanical connection (no more maneuvering the loader to fit into the frames).
  • Exit the tractor.
  • Fold up the parking stands.
  • Attach the hydraulic connection.
  • Enter the tractor and have full control of the loader.

 

Specifications

Compare >>>

Select up to 2 models to compare specifications

John Deere620R Loader
Add Model
Add Model
Tractor
Model 6110R/M, 6120R/M, and 6130R/M
Front tire 480/70R28
Rear tire 520/70R38
Front axle configuration MFWD with Limited Slip Differential
Wheelbase 2580 mm
102 in.
Pump capacity 114 L/min
30.1 gpm
Rated pressure 200 bar
2901 psi
Loader
Leveling configuration Non-Self Loading (NSL)
Bucket used 2150HD Grapple
Bucket weight 281 kg
619 lb
Lift capacity at full height Measured at pivot (U)
2577 kg
5681 lbMeasured at 800 mm ahead of pivot (V)
1726 kg
3805 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
2681 kg
5913 lbMeasured at 800 mm ahead of pivot (X)
2064 kg
4550 lb
Boom breakout force Measured at pivot (Y)
2784 kgf
6138 lbfMeasured at 800 mm ahead of pivot (Z)
2018 kgf
4449 lbf
Bucket rollback force capacity At maximum height (VV)
2363 kgf
5210 lbfAt 59-in. (1500-mm) lift height (XX)
4294 kgf
9467 lbfAt ground-level line (ZZ)
4256 kgf
9383 lbf
Dimensions Maximum lift height (A)
4124 mm
162 in.At full height - bucket level(B)
3884 mm
153 in.At full height - bucket dumped (C)
3116 mm
123 in.
Overall length (I+F), ft (m)
Overall height in carry position (J)
Digging depth (H) 60 mm
2.3 in.
Reach At maximum height (D)
770 mm
30 in.At ground level - bucket level (F)
2509 mm
99 in.
Bucket angle Dump angle, degrees (E)
-59 degree (angle)Rollback angle, degrees (G)
48 degree (angle)Dump angle, ground
-151 degree (angle)
Cycle times Loader raise, seconds
3.43 secondsLoader lower, seconds
2.57 secondsBucket dump, seconds
2.65 secondsBucket rollback, seconds
1.81 seconds

Accessories and Attachments

Ballast Box

Large Ballast Box - BW15852

Buckets

85 In. (2150 mm) Global High Volume Bucket - BW16006

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

85 In. (2150 mm) Global Materials Bucket - BW15936
Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose task

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

96 In. (2450 mm) Global High Volume Bucket - BW16005

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

Cutting Edges

85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware - BW14267
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge
96 In. (2450 mm) Replaceable Bucket Cutting Edge with Hardware - BW14269
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

GRAPPLES

Five-tine round bale and silage grapple with grille - BW16161
Five-tine round bale/silage grapple with grilleFive-tine round bale/silage grapple with grille
#

All of the H-Series Loaders use the same five-tine pin-on grapple. The advantages of this grapple are:

  • The pin-on method puts the least amount of stress possible on the bucket.
  • The grapple has a wide stance, making it more difficult to twist.

High-performance operators will choose the five-tine grapple for its increased durability and load-carrying capacity. Advantages include:

  • The ability to handle two large round bales instead of one (where loader capacity allows).
  • Strong grapple arms allow the bucket capacity to be increased by almost twice the amount of normal bucket capacity in materials such as silage.

The grapple is equipped with twin cylinders to provide excellent clamping force. 

NOTE: The center tine of the five-tine grapple is slightly off center to avoid contact with the placement of optional digging teeth.

NOTE: The grapple is not compatible with materials or high-volume buckets.

Guards

Hood Guard - BW15892

Hoses and Parts

Hoses and Parts (3rd Function) - BW16869

Hydraulic Connections

2 Function Mid-Mount Quick Couplers - BW16933

Mid-mounted quick-couplers offer growers an economical approach to powering loader hydraulics. Hoses run from the tractor mid valve to the mounting frame where there are individually connected to the loader hydraulic hoses.

2 Function Single Point Coupler, Loader Half - BW15914
2 Function Single Point Hydraulic Connection - BW16931
Single-point hydraulic connectionSingle-point hydraulic connection
#

The R-Series Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

3 Function Mid-Mount Quick Couplers - BW16935

Mid-mounted quick-couplers offer growers an economical approach to powering loader hydraulics. Hoses run from the tractor mid valve to the mounting frame where there are individually connected to the loader hydraulic hoses.

3 Function Single Point Hydraulic Connection - BW16828
Single-point hydraulic connectionSingle-point hydraulic connection
#

The R-Series Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

3 Function Single Point Hydraulic Connection, Loader Half - BXX10013
Single-point hydraulic connectionSingle-point hydraulic connection
#

The R-Series Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Hoses and Parts (2 Function) - BW16855

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Hoses and Parts (2 Function) - BW16857

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Hoses and Parts (3 Function) - BW16856
Hoses and Parts (3 Function) - BW16858

Hydraulic Controls

Hoses and Parts (2 Function) - BW16806

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Miscellaneous

Digging Teeth - BW15763

Digging teeth can be added to the heavy-duty bucket for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.

Hydraulic Remote Implement Latch - BW17038
#
#

If swapping implements quickly is required, look to the hydraulic remote implement latch. Switching from a bucket to a bale spear can now be accomplished quickly, with limited movements of the loader, and without leaving the operator’s seat.

 

The hydraulic remote implement latch is powered by a hydraulic accumulator, which collects and stores excess oil generated through the normal operation of the boom (curl, dump, lift, lower). To activate the device, the two switches installed in the right-hand side of the operator’s station are pressed simultaneously by the operator. This action releases the oil, and unlocks the implement.

 

This feature does not require a third-function hydraulic system.

Mounting Frame Components

Tool Box Bracket - BW16888

Tractor Mounting Frames

Mounting Frame - BW16826