New H380 Loader

Ag Tractor Loaders
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Superior strength and visibility
  • For heavy-duty chores
  • Parking stands are integrated on the loader

More Info

Features

False rod bucket cylinders improve productivity
False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.

 

Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Boom lockout for easy service
Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Concealed oil lines improve appearance and reduce damage
Concealed oil lines through boom armConcealed oil lines through boom arm
#
Oil lines routed through the boom armOil lines routed through the boom arm
Oil lines routed through the torque tubeOil lines routed through the torque tube

Over time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

Loader removal (parking) made easy
Parking standsParking stands
#

John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.

 

To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, install the parking stands and place the mast pins in the open position.

Removing or parking the loader (7R/H480 Shown)
Bucket slightly dumped and down pressure (7R/H480 Shown)Bucket slightly dumped and down pressure (7R/H480 Shown)
#
Parking stand in stored positionParking stand in stored position
Removing parking standRemoving parking stand
Bucket slightly dumped - Parking stands installed (7R/H480 Shown)Bucket slightly dumped - Parking stands installed (7R/H480 Shown)
Mast pin in the closed position Mast pin in the closed position
Rotating mast pin to the open positionRotating mast pin to the open position

Utilizing the boom circuit with the tractor in neutral, rotate the mast forward until the mast has rotated past the pin location on the mounting frame by extending the lift cylinder. Now using the bucket circuit, roll back the bucket until the mast is removed from the pocket and will clear the tires.

Mast pin in the open positionMast pin in the open position
Masts rotate forward, then bucket rolled back (7R/H480 Shown)Masts rotate forward, then bucket rolled back (7R/H480 Shown)

With the tractor in park, shut the engine off and relieve the hydraulic pressure as indicated for the tractor. Relieve pressure on the single-point hydraulic connection, then disconnect or open the single-point hydraulic connector.

Relieving the hydraulic pressureRelieving the hydraulic pressure
Disconnect/open single-point hydraulic connectionDisconnect/open single-point hydraulic connection

Store the loader half of the single-point connector. The tractor is now ready to back away from the loader.

Storing the hydraulic hoses (7R/H480 Shown)Storing the hydraulic hoses (7R/H480 Shown)
#
Tractor ready to be backed away from loader (7R/H480 Shown)Tractor ready to be backed away from loader (7R/H480 Shown)
Backing away from loader (7R/H480 Shown)Backing away from loader (7R/H480 Shown)
Parked loader (H480 Shown)Parked loader (H480 Shown)
Single-point hydraulic connection saves time
Single-point hydraulic connection (open)Single-point hydraulic connection (open)
Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereH380 Loader
Add Model
Add Model
Tractor
Model 6170M
Front tire 540/65R34
Rear tire 710/70R42
Front axle configuration MFWD w/ Limited Slip Differential
Wheelbase 2800 mm
110.2 in.
Pump capacity 114 L/min
30 gpm
Rated pressure 200 bar
2900 psi
Loader
Leveling configuration Mechanical Self Leveling (MSL)
Bucket used Global Heavy-Duty Bucket 2450 mm
Global Heavy-Duty Bucket 96 in.
Bucket weight 375 kg
825 lb
Lift capacity at full height Measured at pivot (U)
1896 kg
4171 lbMeasured at 800 mm ahead of pivot (V)
2056 kg
4523 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
2938 kg
6464 lbMeasured at 800 mm ahead of pivot (X)
2795 kg
6149 lb
Boom breakout force Measured at pivot (Y)
3691 kgf
8120 lbfMeasured at 800 mm ahead of pivot (Z)
3275 kgf
7205 lbf
Bucket rollback force capacity At maximum height (VV)
2611 kgf
5744 lbfAt 59-in. (1500-mm) lift height (XX)
4909 kgf
10800 lbfAt ground-level line (ZZ)
4782 kgf
10520 lbf
Dimensions Maximum lift height (A)
4499 mm
177 in.At full height - bucket level(B)
4290 mm
169 in.At full height - bucket dumped (C)
3438 mm
135 in.
Overall length (I+F), ft (m) 5.4 m
17.8 ft
Overall height in carry position (J)
Digging depth (H) 157 mm
6 in.
Reach At maximum height (D)
917 mm
36 in.At ground level - bucket level (F)
2621 mm
103 in.
Bucket angle Dump angle, degrees (E)
-69 degree (angle)Rollback angle, degrees (G)
44 degree (angle)Dump angle, ground
-91 degree (angle)
Cycle times Loader raise, seconds
4.1 secondsLoader lower, seconds
2.6 secondsBucket dump, seconds
1.8 secondsBucket rollback, seconds
1.8 seconds

Accessories and Attachments

Ballast Box:

Large Ballast Box - BW15852

Buckets:

85 In. (2150 mm) Global High Volume Bucket - BW16006

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

85 In. (2150 mm) Global Materials Bucket - BW15936
Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

96 In. (2450 mm) Global High Volume Bucket - BW16005

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

Cutting Edges:

85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware - BW14267
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge
96 In. (2450 mm) Replaceable Bucket Cutting Edge with Hardware - BW14269
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

EH Valve:

E-ICV Valve and Parts (3rd Function) - BW15118
E-ICV Valve and Parts (3rd Function) - BW15987
E-ICV Valve and Parts (3rd Function) - BW15988
EH Mounting Parts - BW15119
EH Valve - BW14366
Mid-Mount E- ICV Valve and Parts (3rd Function) - BW15314

GRAPPLES

Five-tine round bale and silage grapple with grille - BW16161
Five-tine round bale/silage grapple with grilleFive-tine round bale/silage grapple with grille
#

All of the H-Series Loaders use the same five-tine pin-on grapple. The advantages of this grapple are:

  • The pin-on method puts the least amount of stress possible on the bucket.
  • The grapple has a wide stance, making it more difficult to twist.

High-performance operators will choose the five-tine grapple for its increased durability and load-carrying capacity. Advantages include:

  • The ability to handle two large round bales instead of one (where loader capacity allows).
  • Strong grapple arms allow the bucket capacity to be increased by almost twice the amount of normal bucket capacity in materials such as silage.

The grapple is equipped with twin cylinders to provide excellent clamping force. 

NOTE: The center tine of the five-tine grapple is slightly off center to avoid contact with the placement of optional digging teeth.

NOTE: The grapple is not compatible with materials or high-volume buckets.

Guards:

Heavy Duty Hood Guard - BW15616
Lower position without front weight bracketLower position without front weight bracket
Hood guard with front weights Hood guard with front weights
Hood guard folded for servicingHood guard folded for servicing
Hood guard design allows for full lightingHood guard design allows for full lighting

The heavy-duty hood guard is compatible with 7030, 7030 Premium, 6615, 6715, 7220, 7320, 7420, and 7520 Tractors.

 

The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night

 

The hood guard:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

 

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so the front weight is the first point of contact against lower stationary objects.

 

If a front weight is not used, the lower bar can be moved downward to improve the protection of the grille below the lights.

 

The features of the hood guard include:

  • Folds down to allow the hood to open and provide access to the battery and filter
  • Extra steel behind the mainframe to increase strength
  • High height to better protect the top of the hood
Hood Guard - BW14035
7000 and 7010 hood guard7000 and 7010 hood guard

The hood guard is highly recommended for all tractors. The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is to allow the front weight bracket to be the first point of contact against lower stationary objects.

Hood Guard - BW14796
7000 and 7010 hood guard7000 and 7010 hood guard
#

This hood guard is compatible with 7600 7610, 7700, 7710, 7800, and 7810 Tractors.


The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon
    or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight, so the front weight is the first point of contact against lower stationary objects.

Hood Guard - BW15892
Hood guard on 6R TractorHood guard on 6R Tractor
Hood guard for 6R folded downHood guard for 6R folded down

The hood guard's basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night

Compatibility:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

 

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so the front weight bracket is the first point of contact against lower stationary objects. The height of the hood guard allows better protection for the top of the hood and allows operators to see the top of the hood guard.

Hoses and Parts:

Hoses and Parts (2 Function) - BW15123
Hoses and Parts (3 Function) - BW15093
Hoses and Parts (3rd Function) - BW16113
Hoses and Parts (3rd Function) - BW16187

Hydraulic Connections:

3 Function Multi-Coupler, Tractor Half - BW16097
Single-point hydraulic connectionSingle-point hydraulic connection

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

3 Function Single Point Hydraulic Connection, FT4 Tractor Half and grapple mobile half - BW16258
Single-point hydraulic connectionSingle-point hydraulic connection

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Hydraulic Controls:

2 Function Hoses and Parts - BW16112

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function Hoses and Parts - BWA1539

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function Hydraulic Hoses and Controls - BWA1536
3 Function Hydraulic Hoses and Controls - BWA1537
3 Function Hydraulic Hoses and Controls - BWA1532
3 Function Hydraulic Hoses and Controls - BWA1533
3 Function SLC, ICV, Hoses and Parts - BWA1534
3 Function SLC, M-ICV, Hoses and Parts - BWA1566
3 Function SLC, M-ICV, Hoses and Parts - BWA1568
3 Function SLC, M-ICV, Hoses and Parts - BWA1607

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function SLC, Rear Mount Loader Control Valve, Hoses and Parts - BWA1535
3-Function, Single Point, Rigid Lines and Parts - BW16472

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Mid-Mounted Independent Control Valve (3 Function) - BW15986
Single Lever Control and Cables - BW14678
Single Lever Control and Mounting Parts (2 or 3 Function) - BW15744
Single Lever Control and Mounting Parts (3 Function with GSS) - BW15785
Single Lever Control and Mounting Parts (3 Function with GSS) - BW15784

LOADER MOUNTED FENDERS

Stationary fenders - BW15906
Stationary fender (H480 shown)Stationary fender (H480 shown)
#

Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.

 

The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.

LOADER SUSPENSION SYSTEM

Loader suspension system with operator station on and off switch - BW15866
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BW16070
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BW16266
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Miscellaneous:

Bag of Parts - BW15647
Digging Teeth - BW15763

Digging teeth can be added to the heavy-duty bucket for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.

Loader Boom and Bucket Valves - BW15006
Power Beyond Spacer - BW15379
Power Beyond Spacer - BW15989

Mounting Frame Components:

Mounting Brackets - BW16079
Mounting Plate - BW15170
Tool Box Bracket - BW15894
Tool Box Bracket - BW16044

OPERATOR'S MANUAL AND DECAL KIT

French North American operator's manual and decal kit - BW16118
Spanish North American operator's manual and decal kit - BW16119

QUICK UNLATCH

Electric remote carrier latching system - BW16991

The electric remote carrier latching system provides enhanced productivity and improved operator comfort when changing loader attachments. This time-saving feature allows an operator to unlatch and latch attachments for Global or Global Category 2 Carriers without leaving the operator's station.

Electric remote carrier latching system on H340 LoaderElectric remote carrier latching system on H340 Loader
#

To watch a video of the remote carrier latching system, click here.

Unlike competitive remote latching systems, the John Deere electric remote carrier latching system utilizes a simple electric actuator instead of third function hydraulics and/or diverter valves for the loader.

REGIONAL REQUIREMENT KITS

Australia service lock bundle - BW16332

RETURN-TO-POSITION (RTP)

H380 Return-to-position (RTP) loader kit - BW16264
6125R Tractor and H340 NSL Loader with RTP6125R Tractor and H340 NSL Loader with RTP
#

Overview

 

The RTP option for 6R Tractors and H340, H360, and H380 Loaders provides superior productivity and repeatability during material handling operations. An industry exclusive, RTP allows the operator to store two boom positions and two bucket positions through the use of sensors, the tractor’s CommandCenter™, and controller. To watch a video of a loader using RTP click here.

 

With a simple activation of the momentary detents on the electronic joystick, the loader will return to the preset positions. A complete loading cycle now can be accomplished with four movements of the joystick thus significantly improving productivity. Operator stress is also significantly reduced as there is no need to constantly check the loader height and attachment angle during the operation.

RTP System OverviewRTP System Overview
#

The RTP option also incorporates another industry exclusive with the electronic self-leveling (ESL) feature. ESL utilizes the same components as RTP to provide self-leveling capability without the use of mechanical linkages or complex hydraulics.

 

When the RTP option is installed on a non-self-leveling (NSL) loader, the ESL functionality transforms it into a self-leveling loader. If the a material handling operation does not call for the repeatability of RTP and the self-leveling functionality of ESL, the operator can simply deactivate the system and utilize the loader in the traditional NSL manner.

 

For operators demanding superior lift capacity and productivity, RTP can be installed on a mechanical self-leveling (MSL) loader as well. While RTP will enhance the repeatability, the ESL feature will improve the leveling accuracy of the MSL loader.

 

Since the RTP option does not affect the base characteristics of the loader (for example, lift capacity and breakout force), operators need to carefully choose the appropriate loader for their material handling needs. The below chart shows the benefits RTP will offer customers when installing on either a NSL or MSL loader.

 

Feature

Without RTP/ESL

With RTP/ESL

NSL

MSL

NSL

MSL

Visibility

Excellent

Good

Excellent

Good

Leveling accuracy

None

Good

Excellent

Excellent

Rollback/dump angle

Wide range

Limited range

Wide range

Limited range

Rollback limitation at full height

No

Yes

Yes

Yes

Lift capacity

Good

Excellent

Good

Excellent

Boom breakout force

Good

Excellent

Good

Excellent

Bucket rollback cycle times

Excellent

Excellent

Excellent

Excellent

Bucket dump cycle times

Good

Excellent

Good

Excellent

Boom raise/lower cycle times

Excellent

Excellent

Excellent

Excellent

Capable of storing two boom and two bucket positions

No

No

Yes

Yes

Repeatability

No

No

Yes

Yes

Productivity

Fair

Good

Excellent

Excellent

NOTE: Refer to the sales manual or operator’s manual (OM) for complete list of loader specifications.

Operation
RTP screen within the CommandCenterRTP screen within the CommandCenter
#

The RTP operator interface consists of one single screen within the CommandCenter for simple, straightforward setup and operation.  Through this screen, the operator is easily able to activate the system, store two boom and two bucket positions, set the zero position for the attachment, and monitor the boom and bucket positions.

6R CommandArm™ with electronic joystick6R CommandArm™ with electronic joystick
Momentary detents:  B, D, F, and IMomentary detents: B, D, F, and I

Once the operator has saved the two boom positions with buttons (G) and (H) and the two bucket positions with (B) and (C) in the CommandCenter, the operator initiates the automatic functions through the use of the electronic joystick’s momentary detents. 

 

Compatibility
RTP is only compatible with 6R Tractors equipped with electronic joysticks and electronic independent control valves (E-ICVs). On the loader side, RTP is compatible with H340s, H360s, and H380s as long as they include the single-point hydraulic connection (single-point connection is included in the 6R Loader ready packages and is the only connection option available for the H380). RTP is not compatible with loader suspension, but it is compatible with both Triple-Link Suspension (TLS™) and cab suspension available on the 6R Tractors.


Calibration
Once the loader components have been installed and the loader is mounted to the 6R Tractor, a calibration must be performed by a dealer service technician. This simple calibration procedure is only required to be performed once unless a sensor or linkage is replaced or the loader is installed onto another 6R equipped with the RTP option.

Tractor Mounting Frames:

Mounting Frame - BWA1528
Right-hand mounting frameRight-hand mounting frame
Left-hand mounting frameLeft-hand mounting frame
Left and right mounting framesLeft and right mounting frames
Toolbox kit (BW15894)Toolbox kit (BW15894)
Mounting bracket (BW16044)Mounting bracket (BW16044)
Mounting bracket (BW16044)Mounting bracket (BW16044)

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BWA1529
Right-hand mounting frameRight-hand mounting frame
Left-hand mounting frameLeft-hand mounting frame
Left and right mounting framesLeft and right mounting frames
Toolbox kit (BW15894)Toolbox kit (BW15894)
Mounting bracket (BW16044)Mounting bracket (BW16044)
Mounting bracket (BW16044)Mounting bracket (BW16044)

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BWA1558
Right-hand mounting frameRight-hand mounting frame
Left-hand mounting frameLeft-hand mounting frame
Left and right mounting framesLeft and right mounting frames
Toolbox kit (BW15894)Toolbox kit (BW15894)
Mounting bracket (BW16044)Mounting bracket (BW16044)
Mounting bracket (BW16044)Mounting bracket (BW16044)

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW15889
Mounting Frame - BW16134
Mounting Frame - BW16398