New 6115M Low-Profile Tractor

Utility Tractors
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • 115-HP John Deere PowerTech PVX 4.5L engine
  • Available in cab or open-station configuration
  • Standard 21-GPM pressure-compensated hydraulics; 30-GPM pressure-flow compensated system available
  • Choose from a range of available transmissions

More Info

Specifications

Official Test
Nebraska Test number Nebraska OECD Tractor Test 2077 - Summary 893
Engine
Manufacturer John Deere 4.5L PowerTech PVX
Engine family
Aspiration Variable Geometry Turbocharger with Intercooler and Cooled Exhaust Gas
Cylinders/Displacement, cu. in. (L) 4.5 L
4/276 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
220 L
58 U.S. gal.Optional
OOS Low Profile - 180 L
47.5 U.S. gal.
Underhood muffler Yes
Performance
Advertised PTO hp (kW) @ Rated rpm 71 @ 2100 per SAE kW
95 @ 2100 per SAE PTO hp
Official PTO hp (kW) @ Rated rpm @ Standard PTO @ Eng rpm
105.30 (78.52) @ 1962 per SAE rpmMaximum @ Eng rpm
108.65 (81.02) @ 1801 per SAE rpm
71.87 @ 2101 per SAE kW
96.38 @ 2101 per SAE PTO hp
Advertised Engine hp (kW) @ Rated speed 85 @ 2100 per ISO 97/68/EC kW
115 @ 2100 per ISO 97/68/EC hp
Max Unballast Drwbr hp (kW) @ Eng rpm 73.85 @ 1800 per SAE kW
99.04 @ 1800 per SAE hp
Maximum Torque (PTO) @ rpm, lb-ft (Nm) 493 @ 1401 Nm
364 @ 1401 lb-ft
Max Torque Rise (80% rtd spd) @ Eng rpm 39.0% @ 1681 rpm
Maximum Torque Rise % (PTO) @ Eng rpm 51.0% @ 1401 rpm
Fuel Use, U.S. gal./hr & hp hr/gal. at:
PTO @ Rated Eng rpm 23.83 hp hr/gal. & 3.02 hp hr/gal. @ 2101
6.29 & 15.31 @ 2101 U.S. gal./hr
Standard PTO Speed @ Eng speed 24.54 hp hr/gal. & 3.20 hp hr/gal. @ 1962
6.48 & 16.24 @ 1962 U.S. gal.
Maximum PTO Power @ Eng rpm 24.57 hp hr/gal & 3.30 hp hr/gal @ 1801
6.49 (24.57) & 16.74 (3.30) @ 1801 U.S. gal./hr
Maximum Engine Power @ Eng rpm 23.92 hp hr/gal & 2.82 hp hr/gal @ 2100
6.32 (23.92) & 14.34 (2.82) @ 2100 U.S. gal./hr
Max Unballasted Drawbar Power @ Eng rpm 24.76 hp hr/gal & 2.98 hp hr/gal @ 1800
6.54 & 15.14 @ 1800 U.S. gal./hr
75% Load, Full Engine rpm (Unballasted) 20.93 hp hr/gal & 2.56 hp hr/gal @ 2194
5.53 & 13.00 @ 2194 U.S. gal./hr
75% Load @ Reduced rpm (Unballasted) 18.47 hp hr/gal & 2.90 hp hr/gal @ 1590
4.88 (18.47) & 14.72 (2.90) @ 1590 U.S. gal./hr
Transmission
Std. Transmission; Forward/Reverse PowrQuad PLUS 40K; 24F/24R (OOS - SyncroPlus 30K; 12F/4R)
Opt. Transmission; Forward/Reverse PowrQuad PLUS 30K; 16F/16R -- AutoQuad PLUS 40K; 24F/24R (OOS - PowrQuad 30K; 16F/16R -- PowrQuad 40K; 24F/24R)
Reverser Base LH
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper Yes
Power Take-Off (PTO)
Standard Independent 540/1000 RPM, 1 3/8 in.
Optional Independent 540 rpm
PTO Speeds @ Engine rpm 540 @ 1967 or 1000 @ 1962
PTO Actuation Electrohydraulic
Hydraulics
Type Pressure Compensated (PC) System with Load Sensing Function
Pump Rated Output, GPM (L/min.) Standard
80 L/min
21.1 gpmOptional
114 L/min
30 gpm
Rated Flow @ One SCV, GPM (L/min.) 83.8 L/min Std. 45 cc Pump; 115.3 L/min Opt. 60 cc Pump L/min
22.1 U.S. gpm Std. 45 cc Pump; 30.5 U.S. gpm Opt. 60 cc Pump gpm
Max Output @ SCV Couplers, GPM (L/min.) 84.0 L/min Std. 45 cc Pump; 115.6 L/min Opt. 60 cc pump L/min
22.2 U.S. gpm Std. 45 cc Pump; 30.5 U.S. gpm Opt. 60 cc pump gpm
Maximum Operating Pressure, psi (kPa) 20000 kPa
2900 psi
Maximum Hydraulic Power, hp (kW) 25.9 Std. Pump and 33.8 Opt. Pump kW
34.8 Std. Pump and 45.4 Opt. Pump hp
Hitch Draft Control Load Sense Type Electrohydraulic
Remote Control Valves Available Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical
Hitch Category (SAE Designation) Category 3N/2
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
2426.93 - 2 x 75 mm lift cylinders per NE Test kg
5345 - 2 x 75 mm lift cylinders per NE Test lbOptional
3232.50 - 2 x 85 mm lift cylinders per NE Test kg
7130 - 2 x 85 mm lift cylinders per NE Test lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) Standard
Refer to Operator's ManualOptional
Refer to Operator's Manual
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) Standard
Refer to Operator's ManualOptional
Refer to Operator's Manual
Sensing type Electronic Lower Link
Joystick SCV control Mechanical
Final Drive
Type Inboard planetary three pinion
Differential controls Electrohydraulic
Availability Front
YesFront & Rear
Yes
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flange/Rack and pinion
Brakes, Type and Control Hydraulic wet disk
Operator Station
Rollover Protective Structure, OOS Rigid - Foldable - Telescopic
N/APlatform - Flat/Straddle
YesGearshift Location - Console/Floor
Transmission specific
Yes
Cab Doors
2Platform - Flat/Straddle
N/AdB(A) Rating
66.1 dBASeat Suspension System
Mechanical and Air Suspended
2WD Dimensions
Wheelbase, in. (mm) 2580 mm
101.6 in.
Front Tread Range, in. (mm) TBD
Rear Tread Range, in. (mm) TBD
Minimum Rear Tread Setting, in. (mm) TBD
Front Axle Clearance, in. (mm) TBD
Turning Radius w/Brakes, ft (m) TBD
Turning Radius w/o Brakes, ft (m) TBD
Unballasted Operating Weight, lb (kg) TBD
Approx. Ship Wgt, lb (kg) Open; Cab TBD
MFWD Dimensions
Wheelbase, in. (mm) 2580 mm
101.6 in.
Front Tread Range, in. (mm) 2015 mm
79.3 in.
Front Axle Clearance, in. (mm) 520 mm
20.47 in.
Turning Radius w/Brakes, ft (m) Per tire size required, utilize Turn Radius Calculator Tool located in ASM
Turning Radius w/o Brakes, ft (m) Per tire size required, utilize Turn Radius Calculator Tool located in ASM
Limited Slip Differential 30 - 45 percent
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab 4985 kg
10990 lb
4WD Dimensions
Wheelbase, in. (mm) N/A
Wheel Tread, Min. to Max. in. (mm) N/A
Turning Radius w/o Brakes, ft (m) N/A
Nebraska Test Unballasted w/Duals, lb (kg) N/A
Unballasted Weight, lb (kg) N/A
Standard Tires
2WD Front
10.00-16 in.?10PR F2?BiasRear
460/85R34 in.?147A8?R1W?Radial
MFWD Front
380/85R24 in. 131A8 R1W RadialRear
460/85R34 in. 147 A8 R1W Radial
4WD
Track widths N/A
Miscellaneous
Country of Manufacture Mannheim, Germany
Ballasting Restrictions, lb (kg) Refer to Operator's Manual
*Notes Updated - 03/28/2014