New Aercore™ 2000 Aerator

Aerators
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • 77.5-inch coring swath
  • Fiberglass reinforced belts
  • Six tine options to choose from
  • Simple maintenance

More Info

Features

Productivity
ProductivityProductivity
#

Productivity for aeration equipment is measured in two ways:

  • Square feet per hour
  • The number of holes per square foot

The Aercore™ models excel in both areas. All of these aerators can pull as many as 30 cores per square foot. The number of holes per square foot is a variable number based on the ground speed of the tractor.  Most competitors try to quote high numbers of square feet per hour.

Simple drive system
Belt drive systemBelt drive system

The Aercore™ 2000, 1500, and 1000 use the same belt-driven design, which provides a quiet, smooth operation that does not require lubrication. A matched pair of fiberglass-reinforced belts provides long life and requires minimal adjustments.

 

Even the occasional belt replacement is made easy by having all the belt drive components located on top of the machine, where they are easily accessible. All the drive components are easily located for daily checks and routine maintenance. The entire drive assembly utilizes sealed bearings, so there is no need for daily lubrication.

Large-diameter roller

The Aercore™ 1000, 1500, and 2000 have a large, 6-in. (15.2-cm) diameter roller, which provides better ground clearance and reduces the potential for turf scuffing in undulating areas.

Tine holders
Tine holdersTine holders
#

Four sizes of tine holders are available for the Aercore™ aerators; the choice is determined by the turf's needs:

  • 4X tine holders are suited for those who want larger tines that have the closest-possible side-to-side hole spacing. The 4X tine holders have a hole spacing of 2.4 in. (61 mm).  There are two 4X tine holders—one for tines with a 7/8-in. (22.2-mm) mounting diameter and one for tines with a 3/4-in. (19.0-mm) mounting diameter.
  • 3X tine holders are also for larger tines, but at a wider spacing. The 3X tine holders have a spacing of 3.2 in. (81.3 mm). There are also 3X tine holders—one for tines with a 7/8-in. (22.2-mm) mounting diameter and one for tines with a 3/4-in. (19.0-mm) mounting diameter.
  • Mini tine holders are for those who want to poke a lot of small holes. Mini tine holders provide a hole spacing of 1-3/8 in. (34.5 mm). The mini tine holder is compatible with tines that have a 3/8-in. (9.65-mm) mounting diameter.
  • Needle tine holders are for making the smallest-possible hole when aerating greens. Disruptions of play can be minimized by not having to pick up cores after aeration. Needle tine holders provide a hole spacing of 1-3/8 in. (34.5 mm). The needle tine holder is compatible with both the 0.20-in. (5-mm) and 0.31-in. (8-mm) tines. NOTE: These holders are for the L-shaped needle tines.
Attachment numberAttachment descriptionRequired quantities
  100015002000
BTC10180(2) 4x tine holders for tines with 3/4-in. (19-mm)mounting diameter234
BTC10181(2) 4x tine holders for tines with 7/8-in. (22.2-mm) mounting diameter234
BTC10182(2) 3x tine holders for tines with 7/8-in. (22.2-mm) mounting diameter234
BTC10183(2) mini tine holders234
BTC10184(2) needle tine holders234
BTC101853x turf guard base kit111
BTC101863x turf guard add kit for 1500, 2000 12
BTC101874x turf guard base kit111
BTC101884x turf guard add kit for 1500, 2000 12
BTC10189Needle/mini tine base kit111
BTC10190Needle/mini tine add kit for 1500 12

 

*Part numbers in kit descriptions do not include hardware

Park stands
Park standsPark stands

The park stand design allows quick and easy removal of the park stands for aerification and easy attachment for storage. No tools are needed to remove and attach the improved park stands.

These park stands are standard equipment according to the follow serial number ranges and are retrofittable to prior machines:

  • 1000 Aercore™ - TC1000X045001 and above
  • 1500 Aercore - TC1500X045001 and above
  • 2000 Aercore - TC2000X015001 and above
Serviceability made easy
Aercore™ 1000 service accessAercore™ 1000 service access

Serviceability is a key issue on aeration equipment, and the Aercore 1000, 1500, and 2000 have the best service access in the industry. As the photo illustrates, with the cover lifted up, the drive assembly is readily accessed.

The entire tine ram assembly can be removed in a matter of minutes by removing a single cap screw on the top end and four bolts on the rear frame. Tines can easily be changed from the rear of the machine in minutes, as well.

Access to the tine holders is also achieved from the rear of the machine, making it very convenient to alter the hole spacing with a different set of tine holders. Belt changes can be easily accomplished because they are readily accessible.

Specifications

Machine
Coring width 190.6 cm
77.5 in.
Coring depth Up to 100 mm
4 in.
Hole pattern Option 1
With 4X tine holders, variable 61x51-127 mm
2.4x2.0-5.0 in.Option 2
With 3X tine holders, variable 81.3x50-125 mm
3.2x2.0-5.0 in.
Productivity
2.4 x 2.0-in. (30 x 50 mm) 3722 sq m/hr
40,026 sq ft/hr
2.4 x 2.5-in. (30 x 64 mm) 50,033 sq ft/hr
4653 sq m/hr
2.4 x 3.0-in. (30 x 76 mm) 5584 sq m/hr
60,040 sq ft/hr
2.4 x 4.0-in. (30 x 101 mm) 7445 sq m/hr
80,053 sq ft/hr
2.4 x 4.5-in. (30 x 111 mm) 8376 sq m/hr
90,059 sq ft/hr
2.4 x 5.0-in. (30 x 127 mm) 9306 sq m/hr
100,066 sq ft/hr
Tine Sizes, Tubular
Option 1 25.4 mm
1 in.
Option 2 19 mm
3/4 in.
Option 3 16 mm
0.625 in.
Option 4 12.7 mm
0.5 in.
Option 5 10 mm
0.375 in.
Tine Sizes, Open Side
Option 1 25.4 mm
1 in.
Option 2 0.875 in.
22.23 mm
Option 3 20.64 mm
0.813 in.
Option 4 0.75 in.
19 mm
Option 5 0.625 in.
16 mm
Option 6 12.7 mm
1/2 in.
Option 7 10 mm
0.375 in.
Option 8 0.25 in.
6.35 mm
Tine Sizes, Solid
Option 1
Option 2 16 mm
0.625 in.
Option 3 10 mm
0.375 in.
Option 4 Cross with rib: 12.7 mm
0.5 in.
Option 5 Super Cross with rib: 19 mm
0.75 in.
Dimensions
Weight 772 kg
1728 lb
Height 990 mm
39 in.
Width 2177 mm
85.7 in.
Length 845 mm
33 in.
Additional information
Date collected

Accessories and Attachments

Tine Holders

Set of (2) 3X Tine Holders for Tines with 3/4 In. (19 mm) Mounting Diameter - BTC10182
Set of (2) 4X Tine Holders for Tines with 3/4 In. (19 mm) Mounting Diameter - BTC10180
Set of (2) 4X Tine Holders for Tines with 7/8 In. (22.2 mm) Mounting Diameter - BTC10181
Turf Guard Add Kit for all 3X Tine Holders - BTC10186
Turf Guard Add Kit for all 4X Tine Holders - BTC10188
Turf Guard Add Kit for all Mini and Needle Tine Holders - BTC10190
Turf Guard Base Kit for all 3X Tine Holders - BTC10185
Turf Guard Base Kit for all 4X Tine Holders - BTC10187
Turf Guard Base Kit for all Mini and Needle Tine Holders - BTC10189

Tines

1 In. HD Side-Eject - TCU17331
Fairway side ejectFairway side eject

Side-eject tine used for stickier soils that may tend to plug tubular tipped tines.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

13/16-in. HD side eject

TCU17456

3/4

18.5

0.73

3

12.5

0.49

152

6

13/16-in. HDT side eject

 TCU17457

 3/4

 18.3

 0.72

 3

 12.3

 0.485

 152

 6

7/8-in. HD side eject

 TCU17342

3/4

 19.1

 0.75

2.2

 14.6

 0.575

 152

 6

1-in. HD side eject

TCU17331

7/8

25

1

4.9

15.2

0.6

140

5.5

1-in. HDT side eject

 TCU17332

 7/8

 25

 1

 4.9

 15.2

 0.6

 140

 5.5

1 In. HD Tubular Top-Eject - TCU17333
Fairway tubular/top ejectFairway tubular/top eject

Having compaction problems on the fairways? These tines pull a larger core than any other John Deere tine.

 

HDT -- the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tines will retain their length during their working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

1-in. HD tubular top eject

TCU17333

7/8

25.4

1

5.1

15.2

0.6

140

5.5

1-in. HDT tubular top eject

 TCU17334

 7/8

 25.4

 1

 5.1

 15.2

0 .6

 140

 5.5

1 In. HDT Side-Eject - TCU17332
Fairway side ejectFairway side eject

Side-eject tine used for stickier soils that may tend to plug tubular tipped tines.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

13/16-in. HD side eject

TCU17456

3/4

18.5

0.73

3

12.5

0.49

152

6

13/16-in. HDT side eject

 TCU17457

 3/4

 18.3

 0.72

 3

 12.3

 0.485

 152

 6

7/8-in. HD side eject

 TCU17342

3/4

 19.1

 0.75

2.2

 14.6

 0.575

 152

 6

1-in. HD side eject

TCU17331

7/8

25

1

4.9

15.2

0.6

140

5.5

1-in. HDT side eject

 TCU17332

 7/8

 25

 1

 4.9

 15.2

 0.6

 140

 5.5

1 In. HDT Tubular Top-Eject - TCU17334
Fairway tubular/top ejectFairway tubular/top eject

Having compaction problems on the fairways? These tines pull a larger core than any other John Deere tine.

 

HDT -- the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tines will retain their length during their working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

1-in. HD tubular top eject

TCU17333

7/8

25.4

1

5.1

15.2

0.6

140

5.5

1-in. HDT tubular top eject

 TCU17334

 7/8

 25.4

 1

 5.1

 15.2

0 .6

 140

 5.5

1/2 In. HD Tubular - TCU17343
Tubular top-eject coring tinesTubular top-eject coring tines

The popular selection for coring on greens, tee boxes, approaches, and fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HD tubular top eject

 TCU17343

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 140

 5.5

 1/2-in. HDT tubular top eject

 TCU17344

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HD tubular top eject

 TCU17355

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 140

 5.5

 5/8-in. HDT tubular top eject

 TCU17356

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HD tubular top eject

 TCU17454

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

 3/4-in. HDT tubular top eject

 TCU17340

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

1/2 In. HDT Side-Eject - TCU17345
Side-eject tines - HDTSide-eject tines - HDT

Side-eject tines are useful in soils that tend to plug tubular tines, particularly fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerate will be comparable with the first green aerated.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HDT side eject

 TCU17345

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HDT side eject

 TCU17337

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HDT side-eject

 TCU17341

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

1/2 In. HDT Tubular - TCU17344
Tubular top-eject coring tinesTubular top-eject coring tines

The popular selection for coring on greens, tee boxes, approaches, and fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HD tubular top eject

 TCU17343

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 140

 5.5

 1/2-in. HDT tubular top eject

 TCU17344

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HD tubular top eject

 TCU17355

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 140

 5.5

 5/8-in. HDT tubular top eject

 TCU17356

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HD tubular top eject

 TCU17454

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

 3/4-in. HDT tubular top eject

 TCU17340

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

1/4 In. (6 mm) Open Sided Mini Tine - TCU17452
Mini tinesMini tines

Allow for a quicker recovery period for the playing surface. Pulls a core with minimal surface disruption.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

Mini tine HD

 TCU17452

 Mini

 7.9

 0.31

 1.1

 5.6

 0.221

 127

 5

Mini tine HDT

 TCU17453

 Mini

 7.9

 0.31

1.2

 5.5

 0.218

 130

 5.25

 Super mini HD

 TCU17347

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 114

 4.5

Super mini HDT

 TCU17348

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 117

 4.625

13/16 In. HD Side-Eject - TCU17456
Fairway side ejectFairway side eject

Side-eject tine used for stickier soils that may tend to plug tubular tipped tines.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

13/16-in. HD side eject

TCU17456

3/4

18.5

0.73

3

12.5

0.49

152

6

13/16-in. HDT side eject

 TCU17457

 3/4

 18.3

 0.72

 3

 12.3

 0.485

 152

 6

7/8-in. HD side eject

 TCU17342

3/4

 19.1

 0.75

2.2

 14.6

 0.575

 152

 6

1-in. HD side eject

TCU17331

7/8

25

1

4.9

15.2

0.6

140

5.5

1-in. HDT side eject

 TCU17332

 7/8

 25

 1

 4.9

 15.2

 0.6

 140

 5.5

13/16 In. HDT Side-Eject - TCU17457
Fairway side ejectFairway side eject

Side-eject tine used for stickier soils that may tend to plug tubular tipped tines.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

13/16-in. HD side eject

TCU17456

3/4

18.5

0.73

3

12.5

0.49

152

6

13/16-in. HDT side eject

 TCU17457

 3/4

 18.3

 0.72

 3

 12.3

 0.485

 152

 6

7/8-in. HD side eject

 TCU17342

3/4

 19.1

 0.75

2.2

 14.6

 0.575

 152

 6

1-in. HD side eject

TCU17331

7/8

25

1

4.9

15.2

0.6

140

5.5

1-in. HDT side eject

 TCU17332

 7/8

 25

 1

 4.9

 15.2

 0.6

 140

 5.5

3/4 In. (19mm) Tubular Tine - TCU18638
Conventional tubular coring tinesConventional tubular coring tines

Conventional tubular coring tines that can be used on greens, tees, approaches, and fairways.

 

MD - medium-duty tine. Lower-cost tines in comparison to the HD and HDT tines, but also shorter life.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

3/8-in. tubular top-eject MD

TCU17449

3/4

11.1

0.438

1.6

7.9

0.313

146

5.75

1/2-in. tubular top-eject MD

 TCU17450

 3/4

 14.3

 0.563

 2.4

 9.5

 0.375

 146

 5.75

5/8-in. tubular top-eject MD

 TCU17451

3/4

 15.9

 0.625

1.6

 12.7

0.5

 146

 5.75

3/4-in. tubular top-eject MD

 TCU18638

 7/8

 19.1

 0.75

 2.4

 14.3

0.563

 146

 5.75

3/4 In. HD Tubular - TCU17454
Tubular top-eject coring tinesTubular top-eject coring tines

The popular selection for coring on greens, tee boxes, approaches, and fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HD tubular top eject

 TCU17343

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 140

 5.5

 1/2-in. HDT tubular top eject

 TCU17344

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HD tubular top eject

 TCU17355

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 140

 5.5

 5/8-in. HDT tubular top eject

 TCU17356

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HD tubular top eject

 TCU17454

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

 3/4-in. HDT tubular top eject

 TCU17340

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

3/4 In. HDT Side-Eject - TCU17341
Side-eject tines - HDTSide-eject tines - HDT

Side-eject tines are useful in soils that tend to plug tubular tines, particularly fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerate will be comparable with the first green aerated.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HDT side eject

 TCU17345

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HDT side eject

 TCU17337

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HDT side-eject

 TCU17341

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

3/4 In. HDT Tubular - TCU17340
Tubular top-eject coring tinesTubular top-eject coring tines

The popular selection for coring on greens, tee boxes, approaches, and fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HD tubular top eject

 TCU17343

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 140

 5.5

 1/2-in. HDT tubular top eject

 TCU17344

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HD tubular top eject

 TCU17355

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 140

 5.5

 5/8-in. HDT tubular top eject

 TCU17356

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HD tubular top eject

 TCU17454

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

 3/4-in. HDT tubular top eject

 TCU17340

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

3/8 In. Solid HD x 5 In. - TCU17346
Conventional solidtinesConventional solidtines

Conventional solid tines, but with the long-life benefits of the HD design. Used when pulling a core is not necessary or desirable.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

3/8-in. HD solid

TCU17346

Mini

9

0.375

127

5

5/8-in. HD solid

TCU17338

3/4

15.9

0.625

127

5

5/8-in. HD solid

 TCU17339

 3/4

 15.9

 0.625

 178

 7

5/8 In. HD Solid - TCU17338
Conventional solidtinesConventional solidtines

Conventional solid tines, but with the long-life benefits of the HD design. Used when pulling a core is not necessary or desirable.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

3/8-in. HD solid

TCU17346

Mini

9

0.375

127

5

5/8-in. HD solid

TCU17338

3/4

15.9

0.625

127

5

5/8-in. HD solid

 TCU17339

 3/4

 15.9

 0.625

 178

 7

5/8 In. HD Solid - TCU17339
Conventional solidtinesConventional solidtines

Conventional solid tines, but with the long-life benefits of the HD design. Used when pulling a core is not necessary or desirable.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

3/8-in. HD solid

TCU17346

Mini

9

0.375

127

5

5/8-in. HD solid

TCU17338

3/4

15.9

0.625

127

5

5/8-in. HD solid

 TCU17339

 3/4

 15.9

 0.625

 178

 7

5/8 In. HD Tubular - TCU17335
Tubular top-eject coring tinesTubular top-eject coring tines

The popular selection for coring on greens, tee boxes, approaches, and fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HD tubular top eject

 TCU17343

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 140

 5.5

 1/2-in. HDT tubular top eject

 TCU17344

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HD tubular top eject

 TCU17355

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 140

 5.5

 5/8-in. HDT tubular top eject

 TCU17356

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HD tubular top eject

 TCU17454

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

 3/4-in. HDT tubular top eject

 TCU17340

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

5/8 In. HDT Side-Eject - TCU17337
Side-eject tines - HDTSide-eject tines - HDT

Side-eject tines are useful in soils that tend to plug tubular tines, particularly fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerate will be comparable with the first green aerated.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HDT side eject

 TCU17345

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HDT side eject

 TCU17337

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HDT side-eject

 TCU17341

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

5/8 In. HDT Tubular - TCU17336
Tubular top-eject coring tinesTubular top-eject coring tines

The popular selection for coring on greens, tee boxes, approaches, and fairways.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

 1/2-in. HD tubular top eject

 TCU17343

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 140

 5.5

 1/2-in. HDT tubular top eject

 TCU17344

 3/4

 13.3

 0.523

 2.2

 8.8

 0.346

 146

 5.75

 5/8-in. HD tubular top eject

 TCU17355

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 140

 5.5

 5/8-in. HDT tubular top eject

 TCU17356

 3/4

 16

 0.63

 1.9

 12.2

 0.481

 146

 5.75

 3/4-in. HD tubular top eject

 TCU17454

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

 3/4-in. HDT tubular top eject

 TCU17340

 7/8

 19.1

 0.75

 2.7

 13.7

 0.54

 159

 6.25

7/8 In. HD Side-Eject - TCU17342
Fairway side ejectFairway side eject

Side-eject tine used for stickier soils that may tend to plug tubular tipped tines.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

13/16-in. HD side eject

TCU17456

3/4

18.5

0.73

3

12.5

0.49

152

6

13/16-in. HDT side eject

 TCU17457

 3/4

 18.3

 0.72

 3

 12.3

 0.485

 152

 6

7/8-in. HD side eject

 TCU17342

3/4

 19.1

 0.75

2.2

 14.6

 0.575

 152

 6

1-in. HD side eject

TCU17331

7/8

25

1

4.9

15.2

0.6

140

5.5

1-in. HDT side eject

 TCU17332

 7/8

 25

 1

 4.9

 15.2

 0.6

 140

 5.5

Bayonet Tine with 3/4 In. Rib HD - TCU17352
Bayonet tinesBayonet tines

High surface area and little disruption to the playing surface. Holes stay open for a long time. Orient the bayonet with the direction of travel for optimum performance.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Solid cross tines

Conventional solid tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

Bayonet w/ 3/4-in. rib HD

 TCU17352

 3/4

 19.1

 0.75

 178

 7

Cross with 1/2 In. Rib HD - TCU17349
Cross tinesCross tines

The cross shape creates a hole with a large surface area compared to an equivalent-sized solid tine. The perimeter of the cross tine is greater than the perimeter around a comparable coring tine, impacting more surface area.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

Cross w/ 1/2-in. rib HD

 TCU17349

 Mini

 12.7

0.5

 140

 5.5

Cross w/ 1/2-in. rib HDT

 TCU17350

 Mini

 12.7

 0.5

 140

 5.5

 Super cross w/ 3/4-in. rib HD

 TCU17351

 3/4

 19.1

 0.75

 146

 5.75

Cross with 1/2 In. Rib HDT - TCU17350
Cross tinesCross tines

The cross shape creates a hole with a large surface area compared to an equivalent-sized solid tine. The perimeter of the cross tine is greater than the perimeter around a comparable coring tine, impacting more surface area.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

Cross w/ 1/2-in. rib HD

 TCU17349

 Mini

 12.7

0.5

 140

 5.5

Cross w/ 1/2-in. rib HDT

 TCU17350

 Mini

 12.7

 0.5

 140

 5.5

 Super cross w/ 3/4-in. rib HD

 TCU17351

 3/4

 19.1

 0.75

 146

 5.75

Quad Tine HDT - TCU17453
Mini tinesMini tines

Allow for a quicker recovery period for the playing surface. Pulls a core with minimal surface disruption.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

Mini tine HD

 TCU17452

 Mini

 7.9

 0.31

 1.1

 5.6

 0.221

 127

 5

Mini tine HDT

 TCU17453

 Mini

 7.9

 0.31

1.2

 5.5

 0.218

 130

 5.25

 Super mini HD

 TCU17347

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 114

 4.5

Super mini HDT

 TCU17348

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 117

 4.625

Super Cross with 3/4 In. Rib HD - TCU17351
Cross tinesCross tines

The cross shape creates a hole with a large surface area compared to an equivalent-sized solid tine. The perimeter of the cross tine is greater than the perimeter around a comparable coring tine, impacting more surface area.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Mini tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Length (mm) 

Length (in.) 

Cross w/ 1/2-in. rib HD

 TCU17349

 Mini

 12.7

0.5

 140

 5.5

Cross w/ 1/2-in. rib HDT

 TCU17350

 Mini

 12.7

 0.5

 140

 5.5

 Super cross w/ 3/4-in. rib HD

 TCU17351

 3/4

 19.1

 0.75

 146

 5.75

Super Quad HD - TCU17347
Mini tinesMini tines

Allow for a quicker recovery period for the playing surface. Pulls a core with minimal surface disruption.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

Mini tine HD

 TCU17452

 Mini

 7.9

 0.31

 1.1

 5.6

 0.221

 127

 5

Mini tine HDT

 TCU17453

 Mini

 7.9

 0.31

1.2

 5.5

 0.218

 130

 5.25

 Super mini HD

 TCU17347

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 114

 4.5

Super mini HDT

 TCU17348

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 117

 4.625

Super Quad HDT - TCU17348
Mini tinesMini tines

Allow for a quicker recovery period for the playing surface. Pulls a core with minimal surface disruption.

 

HDT - the highest quality of tine in the range. A hardened tip is joined to a high-quality body. These tines are exceptionally long lasting. Furthermore, the tine will retain its length during its working life, so the holes on the last green aerated will be comparable with the first green aerated.

 

HD - the same high-quality body as the HDT, but without the high-specification hardened tip. Tine length remains more consistent than conventional tines.

 

Variables such as soil conditions and operator behavior will influence actual life expectancy.

Please click on the links below for information on other high-quality John Deere tines:

 

HD/HDT tubular tines

Side-eject fairway tines

Side-eject HDT tines

Tubular fairway tines

Medium-duty tubular tines

Solid cross tines

Conventional solid tines

Bayonet tines

Needle tines

 

Description 

Part number 

 Mount

External diameter (mm)

External diameter (in.)

Wall thickness (mm) 

Internal diameter (mm) 

Internal diameter (in.)

Length (mm) 

Length (in.) 

Mini tine HD

 TCU17452

 Mini

 7.9

 0.31

 1.1

 5.6

 0.221

 127

 5

Mini tine HDT

 TCU17453

 Mini

 7.9

 0.31

1.2

 5.5

 0.218

 130

 5.25

 Super mini HD

 TCU17347

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 114

 4.5

Super mini HDT

 TCU17348

 Mini

 10.7

 0.42

 1.5

 7.6

 0.3

 117

 4.625