New X750 Signature Series Lawn Tractor

Lawn & Garden Tractors
REQUEST A QUOTE

 (4) Recommended by 100.0%

Starting at: $11,959.00*

REQUEST A QUOTE
Key Features
  • Three-cylinder diesel engine
  • Power, two-wheel steering for easy operation
  • Two-wheel drive with standard differential lock
  • 4-year/700-hour bumper-to-bumper warranty

More Info

Features

Hydrostatic, convenient drive system
Two-wheel steer hydrostatic transaxleTwo-wheel steer hydrostatic transaxle

A rugged, heavy-duty commercial hydrostatic transaxle handles a wide variety of ground-engaging applications and commercial mowing usage.

Infinite control of ground speed and smooth change of direction provide efficiency and operator convenience.

The differential lock provides positive power to both drive wheels for increased traction. It can be engaged by the operator as needed.

Forward0 to 8.5 mph (0 to 13.7 km/h)
Reverse0 to 6 mph (0 to 9.7 km/h)

 

Many quality features are provided:

  • Universal joint splined drive shaft between the engine and transmission is durable and gives efficient power transfer (no belts, no slippage, no power loss).
  • Shaft drive output through continuous live transmission power take-off (PTO) has no belts to slip or wear out.
  • Internal hydraulic PTO with a multi-disk clutch pack:
    • Soft, smooth clutch engagement
    • Longer disk life with continuous oil bath
    • No service required, as disks are self-adjusting
  • Internal wet disk brakes:
    • Isolated from dirt, rust, ice, or other contaminants for effective brake operation
    • Constantly cooled by transmission fluid to minimize wear and eliminate the loss of brakes from overheating
  • Quiet design virtually eliminates hydrostatic whine.
  • Large, efficient 6-cc charge pump produces excellent flow and pressure to allow operating a variety of hydraulic-powered equipment.
  • Externally mounted, oil-filled shock absorber in the control system ensure smooth starts and stops.
  • Exceptional strength and durability:
    • Automotive-type forged flanged axles
    • Heavy ribbed aluminum die-cast axle housings
    • Uses an axial piston-type pump and motor versus less-efficient ball-type rotating groups
Transmission oil cooler

A transmission oil cooler is standard equipment:

  • Helps keep oil temperatures cooler during high draft-load operations
  • Separate automotive-style cooler to provide increased capacity for the oil cooler as well as the radiator, when compared to an oil cooler internal to the radiator
48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile
X730 Tractor with 48A Mower DeckX730 Tractor with 48A Mower Deck
48A Mower Deck48A Mower Deck

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

  • 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
    • Optional MulchControl™ attachment provides superior mulching performance and versatility.
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck is suspended from the vehicle for a smooth and level cut
    • Adjustable mower wheels, positioned just above ground level, help prevent scalping.
Excellent cut quality
48A Mower top48A Mower top
48A Mower underside48A Mower underside

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
Productivity - getting the job done fast
Right side of Accel Deep 48A Mower Deck (shown on X380 Tractor)Right side of Accel Deep 48A Mower Deck (shown on X380 Tractor)

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

  • Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
  • The 48A Power Flow™ blower has an inlet housing with over 50 percent greater area than the 48X Power Flow blower used on previous machines.
Cleanliness - for the mower and the operator
Accel Deep 48A Mower Deck (shown on X380 Tractor)Accel Deep 48A Mower Deck (shown on X380 Tractor)
Accel Deep 48A Mower Deck (shown on X300 Series Tractor)Accel Deep 48A Mower Deck (shown on X300 Series Tractor)

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without build-up of material to interfere with the flow of air and clippings
    • Less need to clean and remove build-up of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
    • Limited amount of material to drift onto the operator and mower deck
    • Even for material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely and the MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash portMower wash port
Mower wash port with hose connectorMower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

  • Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-up coverSpindle pocket with flip-up cover
Easy-to-adjust mower wheel and mower side reinforcementEasy-to-adjust mower wheel and mower side reinforcement

The 48A Mower Deck has strong spindle pockets to keep the blades aligned, even after years of tough service:

  • Ribs in the deck shell add strength where it is needed.
  • The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) mower deck used on previous machines.

Mower wheels are heavy duty:

  • Provides greater strength and durability for longer, trouble-free life.
  • Setting wheels to the correct height for the cutting height is quick and easy.

Low-tension belt-drive design reduces the side load on mower bearings for longer life.

The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes

The 48A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

  • With the optional MulchControl attachment installed (along with the special mulching blades), changing from side-discharge to mulching or vice versa is done with the simple flip of a lever.
    • It is not necessary to change blades when changing discharge modes because the mulching blades are designed for side discharge as well.
  • The Power Flow rear bagger can be used with the MulchControl attachment and blades installed - by simply placing the MulchControl lever in the side-discharge position.
MulchControl option

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl baffle openMulchControl baffle open
MulchControl baffle closedMulchControl baffle closed

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl baffle closedMulchControl baffle closed
MulchControl handleMulchControl handle
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
    • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharge or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side-discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
Power Flow material collection systems
Optional 7-bu (247-L) 2-bag Power Flow rear bagger shownOptional 7-bu (247-L) 2-bag Power Flow rear bagger shown
Power Flow blowerPower Flow blower

A variety of material collection systems is available for use with the Power Flow blower:

  • 7-bu (247-L) 2-bag Power Flow rear bagger
  • 14-bu (493-L) 3-bag Power Flow rear bagger
  • 19-bu (670-L) MC519 Cart

The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.

Important advantages for superior mowing performance and equipment versatility
X730 Tractor mowingX730 Tractor mowing
X754 Tractor mowingX754 Tractor mowing

 

 

X700 Signature Series Tractors offer these important performance advantages:

  • Heavy-duty robotically welded frame for the strength to operate a wide variety of equipment
  • Plenty of engine horsepower and torque to operate larger equipment 
  • Electronic fuel injection (X730, X734, X738, X739)
    • Fast and sure starts
    • Better fuel economy than carbureted engines
    • Reduced emissions
  • Diesel models (X750, X754, X758)
    • Increased durability
    • Improved fuel economy
    • U.S. Environmental Protection Agency (EPA) Final Tier 4 compliant
  • Easy-to-operate Twin Touch™ foot-controlled hydrostatic transmission
  • Power steering for quick, precise control
  • Four-wheel drive for optimum traction in any use and ground condition (X738 and X758)
  • Four-wheel steering for unsurpassed trimming ability (X734 and X754)
  • Full-time four-wheel drive and four-wheel steering for unsurpassed traction, maneuverability, and trimming ability (X739) 
  • Differential lock for increased traction control
  • Hydraulic power take-off (PTO) clutch with soft, modulated engagement
  • Shaft-driven equipment versus a belt drive
  • Shaft-driven transmission versus a belt drive
  • Automotive-type dash instrument cluster with gauges and indicator lights
  • Two-spool hydraulic control valve with outlets
  • From-the-seat adjustable mower depth stop with gauge
  • Exact Adjust mower-leveling feature with onboard gauge and adjusting tool
  • Automotive-type headlights and taillights versus reflectors
  • Optional 540-rpm rear PTO
  • Optional limited Category 1 3-point hitch for rear-mounted equipment
MulchControl™ for 48-in. (122-cm) Accel Deep™ (48A) and 54-in. (137-cm) and 60-in. (152-cm) High-Capacity (HC) Mower Decks is convenient to use
MulchControl advantages and benefits
X730 Tractor mowingX730 Tractor mowing
X730 Tractor with 48A Mower DeckX730 Tractor with 48A Mower Deck

The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings

 

How MulchControl works
MulchControl baffle openMulchControl baffle open
MulchControl baffle closedMulchControl baffle closed

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The left mower blade area is completely enclosed and optimized for mulching, thus will mulch even when the mower is in the side-discharge mode.
    • Baffles around the center and right blades are optimized for mulching when the discharge baffle is closed.
MulchControl handle
MulchControl baffle closedMulchControl baffle closed
MulchControl handleMulchControl handle
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
    • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharge or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side-discharge when grass gets too long
  • Usually side discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
Compatibility

MulchControl is a field-installed attachment and compatible with the following tractors:

  • 2013 and later X700 Signature Series Tractor (SN 10,001-) 9077M 48-in. (122-cm) Accel Deep Mower Deck
  • 2015 and later X700 Signature Series Tractor 9074M 54-in. (137-cm) and 9075M 60-in. (152-cm) HC Mower Deck (SN 030,001-)

 

Power Flow™ material collection systems make lawn cleanup easy
Power Flow blower and chutePower Flow blower and chute
7-bu (247-L), two-bag Power Flow hopper7-bu (247-L), two-bag Power Flow hopper
14-bu (500-L), three-bag Power Flow hopper14-bu (500-L), three-bag Power Flow hopper
19-bu (670-L) MC519 Power Flow cart19-bu (670-L) MC519 Power Flow cart

The 48-in. (122-cm) Accel Deep™ (48A) Mower Deck, 48-in. (122-cm) Edge™ Xtra Mower* and 54-in. (137-cm) and 60-in. (152-cm) Edge High Capacity (HC) Mowers use a high-performance Power Flow blower to collect material into a variety of material collection systems:

  • 7-bu (247-L), two-bag Power Flow hopper 
  • 14-bu (493-L), three-bag Power Flow hopper 
  • 19-bu (670-L), MC519 Power Flow cart 

Features are as follows:

  • Blower is hinged to provide easy installation.
  • Blower is easy to swing out for easy cleanout.
  • Blower fan runs in a clockwise direction (viewed from the right side) to efficiently move material up the chute.

The Power Flow blower works well with either the standard mower blades or the mulching blades.

Each of the John Deere material collection systems has durable construction for long life in homeowner or commercial applications.

*NOTE: The 3-Bag, 14-bu (493-L) Power Flow is not compatible with a X729, X739, or X749 Tractor equipped with a 48X Mower Deck because the chute can contact the rear tire in a turn. However, it is compatible with the 48 Accel Deep (48A) Mower because the increased deck height and the height of its Power Flow blower housing lift the chute high enough to clear the wheel and fender with the 3-bag hopper installed.

Modern styling has functional design
Functional and attractive designFunctional and attractive design
Styled hood with air screens built inStyled hood with air screens built in

The open platform is roomy and uncluttered:

  • Makes getting on and off the tractor easy
  • Provides ample legroom with built-in heel pockets for comfortable operation

The single-piece hood completely encloses the engine:

  • Improves appearance
  • Provides quieter operation
  • Easy to remove for improved service accessibility
  • Painted hood 
    • More scratch and scuff resistant than molded-in color
    • Deep scratches repairable with paint
54-in. (137-cm) Edge™ High-Capacity (HC) Mower Deck is heavy duty
X739 Tractor mowing with 54-in. (137-cm) HC Mower DeckX739 Tractor mowing with 54-in. (137-cm) HC Mower Deck
Side view of mower deckSide view of mower deck

Deep-deck design of 5.5 in. (14 cm) delivers excellent airflow, so material can be processed quickly and efficiently. Deck is stamped from 9-gauge, 0.150-in. (3.8-mm) steel and has welded-on reinforcement at the bottom edge for extra strength and durability.

54-in. (137-cm) HC Mower Deck top view54-in. (137-cm) HC Mower Deck top view
54-in. (137-cm) HC Mower Deck bottom view54-in. (137-cm) HC Mower Deck bottom view

The 54-in. (137-cm) High-Capacity Mower Deck is formed in a hydraulic press to minimize the number of welds and provide a smooth underside for reduced material buildup:

  • Wider and higher discharge opening provides an even clipping dispersal for an excellent finished appearance in all conditions.
  • Durable plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimize the storage space required. 
  • 1-in. (2.5-cm) cold-forged spindles are heat-treated for strength and supported by ball bearings.
  • Front edge is raised above the blade plane to allow even cutting of tall grass.
  • Blade overlap is greater than many conventional decks, for a clean cut.
  • Mower can side-discharge, mulch (optional), or use a Power Flow™ collection system (optional).
Mower wash port Mower wash port
Mower wash port with hose connectorMower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy: 

  • Hose connector is included with the mower deck.

Optional high-performance mulching attachment

Mulching attachment components (48 HC shown) Mulching attachment components (48 HC shown)
#

The high-performance mulching attachment provides excellent mulching performance:

  • This is a high-performance mulching attachment that includes formed steel baffles to control the material and special mulching blades for superior performance.
    • The special mulching blades that are included can also be used for side discharging and collecting, though overall performance may be slightly less than with the standard blades.
  • Order: BM23977, 54 HC mulching attachment

 

Optional MulchControl™ attachment

MulchControl with baffle closedMulchControl with baffle closed
MulchControl handleMulchControl handle

The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
  • The left mower blade area is completely enclosed and optimized for mulching, thus will mulch even when the mower is in the side-discharge mode.
  • Baffles around the center and right blades are optimized for mulching when the discharge baffle is closed.
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
  • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharge or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one-third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired

MulchControl compatibility

MulchControl is a field-installed attachment. Mulching blades are included:

  • MulchControl is for 2015 and later X700 Signature Series Tractor 9074M 54-in. (137-cm) HC Mower Deck (SN 030,001-).

Order:

  • BM25215 MulchControl attachment (54 HC)
Mower deck attachability
X758 Tractor driving onto high-capacity mower deckX758 Tractor driving onto high-capacity mower deck
#

High-capacity (HC) mower decks have ramps positioned on top of the deck for easy installation:

  • On a four-wheel drive (4WD) tractor, the operator can simply drive onto and over the deck.
  • On a two-wheel drive (2WD) tractor, the operator must back onto and over the deck.

To remove the mower deck:

  • Disconnect the drive shaft.
  • Unlock the draft arm locks.
  • Back or drive the tractor onto and off the mower deck. 
    • On a 4WD tractor, the operator can simply back onto and off the deck.
    • On a 2WD tractor, the operator can simply drive forward onto and off the deck.
Optional AutoConnect™ drive (BM23894)
X758 Tractor driving onto high-capacity mower deck with AutoConnect optionX758 Tractor driving onto high-capacity mower deck with AutoConnect option
AutoConnect option installed on X758 TractorAutoConnect option installed on X758 Tractor

AutoConnect driveshaft is an optional kit that will automatically connect or remove the drive from the mower deck to the tractor's mid power take-off (PTO) shaft.

 

The AutoConnect drive does not need to be removed from the tractor when using front-powered equipment.

 

Drive-over mower quick reference (major steps)

John Deere has designed a system that makes it easy to remove and reinstall the mower deck. A few steps need to be followed carefully to ensure success.
 
The list below includes the major steps. Refer to the operator’s manual for a more detailed procedure. The tractor most likely has the mower already installed, so these steps begin with the removal procedure.

DRIVEJD - Always Dependable Product

 

                                                                 Mower removal steps

Drive tractor to level area

 

Ready mower deck

  • Adjust wheels and lower mower deck
  • Draft arms removed (front) and released (rear)
  • Power take-off (PTO): disconnect if manual PTO-connect system, then back-up to clear rear draft arms (If equipped with AutoConnect™, backing-up also disconnects the PTO)
    • Raise rear draft arms

 Increase engine speed, engage traction assist, and drive-over

 

                                                                 Mower installation steps

Verify tractor and mower are ready

  • Alignment of tractor and mower deck
  • Draft arms up
  • PTO in correct position (If manual PTO connect, place shaft in mower hanger)

 Engage traction assist, increase engine speed, and drive- or back-over

 

Join mower to tractor

  • Alignment and attachment verified and PTO connected
  • Draft arms hookup, front
  • Position mower wheels

Done! Set mower deck height and mow.

Engine is three-cylinder diesel for fuel economy and durability
24-hp (17.9-kW) diesel engine24-hp (17.9-kW) diesel engine

 

A liquid-cooled, three-cylinder diesel engine provides exceptional power, performance, fuel economy, and durability to handle commercial-use applications:

  • Large displacement provides exceptional torque
  • Cast-iron block improves noise absorption
  • Quality features include cast-iron cylinder liners, overhead valves, full-pressure lubrication, and replaceable oil filter
  • Solenoid-shift starter ensures easy starts, even in cold weather
  • High-energy glow plugs ensure quick starts in cold weather; an automatic sensing system tells the operator when the engine is ready to start
  • Mechanical fuel bleed eliminates the need for tools and fuel leaking onto the ground when bleeding the fuel system:
    • Simply pump the fuel pump that is located on the side of the engine
  • Electric fuel shutoff eliminates the need for a separate kill switch
  • Indirect injection with pre-combustion chambers provide smooth, quiet operation
  • Engine-mounted 40-amp alternator supplies regulated charge to the battery for fast recharge:
    •  Also provides plenty of power for 12-volt-powered attachments and accessories
  • Low exhaust emissions are certified to meet U.S. Environmental Protection Agency (EPA) and state of California standards for cleaner air:
    • Overhead valve design for efficient airflow
    • Swirl chamber combustion design for efficient combustion
    • Liquid cooled for more consistent operating temperatures
    • Closed crankcase ventilation re-circulates and burns crankcase hydrocarbons

Horsepower (hp)

Maximum torque

Cooling

Displacement

24 hp (17.9 kW)

---

Liquid

60.6 cu in. (993 cc)

Air-intake system
Air intake screensAir intake screens
Radiator screen pulled out for cleaningRadiator screen pulled out for cleaning

Engine intake air is drawn in through screened panels at the base of the pedestal and on the right and left sides of the tractor:

  • Cleanest and coolest area of the tractor
  • Precleans the air to keep large chaff and debris from entering the radiator or air cleaner
  • Easy to clean and service so engine operates at optimum temperature
Diesel engine air filter Diesel engine air filter

The diesel engine uses a heavy-duty cyclonic canister-type replaceable air filter:

  • Completely sealed for effective cleaning
  • Cyclone action that is designed to eject 90 percent to 95 percent of the dirt before it reaches the paper element
  • Secondary safety element that provides additional filtering
  • Total effective filter area of 512 sq in. (3303 sq cm)
Air filter restriction indicatorAir filter restriction indicator

An air filter restriction indicator is standard equipment:

  • Indicator light on the dash alerts the operator when the air filter is dirty and needs to be replaced
  • With a visual check, air filter daily service is simplified
  • Indicator extends the engine life by eliminating inadvertent dirt entry into the engine from over-servicing of the air filter
Hydraulic power steering gives effortless control
X734 Tractor trimming around a treeX734 Tractor trimming around a tree
Power steering control valvePower steering control valve

Power steering is standard equipment. It provides effortless, automotive-like control:

  • Reduced operator fatigue
  • Better maneuverability
  • Increased productivity

    

Two-wheel steer

Four-wheel steer

Full-time four-wheel drive

Full-time four-wheel drive with four-wheel steer

Turning radius 

25 in. (63.5 cm)

21 in. (53.3 cm)

25 in. (63.5 cm)

21 in. (53.3 cm)

Uncut circle radius (60- in. (152-cm) mower deck)

28 in. (71.1 cm)

6 in. (15.2 cm)

28 in. (71.1 cm)

6 in. (15.2 cm)

Turns lock-to-lock left 

2.4

2.5

2.3

2.2

Turns lock-to-lock right 

2.4

2.5

3.1

2.8

 

 

60-in. (152-cm) Edge™ High-Capacity (HC) Mower Deck is heavy duty
X730 Tractor mowing with 60-in. (152-cm) HC mower deckX730 Tractor mowing with 60-in. (152-cm) HC mower deck
Side view of mower deckSide view of mower deck

Deep-deck design of 5.5 in. (14 cm) delivers excellent airflow, so material can be processed quickly and efficiently. Deck is stamped from 9-gauge, 0.150-in. (3.8-mm) steel and has welded-on reinforcement at the bottom edge for extra strength and durability.

60-in. (152-cm) HC mower deck top view60-in. (152-cm) HC mower deck top view
60-in. (152-cm) HC mower deck bottom view60-in. (152-cm) HC mower deck bottom view

The 60-in. (152-cm) High-Capacity Deck is formed in a hydraulic press to minimize the number of welds and provide a smooth underside for reduced material buildup:

  • Wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
  • Durable plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimize the storage space required.
  • 1-in. (2.5-cm) cold-forged spindles are heat-treated for strength and are supported by ball bearings.
  • Front edge is raised above the blade plane to allow even cutting of tall grass.
  • Blade overlap is greater than many conventional decks, for a clean cut.
  • Mower can side-discharge, mulch (optional), or use a Power Flow™ collection system (optional).
Mower wash port Mower wash port
Mower wash port with hose connectorMower wash port with hose connector

 A wash port is provided to make cleaning the underside of the mower deck easy: 

  • Hose connector is included with the mower deck.

 

Optional high-performance mulching attachment

Mulching attachment components (48 HC shown) Mulching attachment components (48 HC shown)
#

An optional mulching attachment is available:

  • This is a high-performance mulching attachment that includes formed steel baffles to control the material and special mulching blades for superior performance.
    • The special mulching blades that are included can also be used for side discharging and collecting, though overall performance may be slightly less than with the standard blades.
  • Order: BM23978, 60 HC mulching attachment

 

Optional MulchControl™ attachment

MulchControl with baffle closedMulchControl with baffle closed
MulchControl handleMulchControl handle

The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
  • The left mower blade area is completely enclosed and optimized for mulching, thus will mulch even when the mower is in the side-discharge mode.
  • Baffles around the center and right blades are optimized for mulching when the discharge baffle is closed.
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
  • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharge or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired

MulchControl compatibility

MulchControl is a field-installed attachment. Mulching blades are included:

  • MulchControl is for 2015 and later X700 Signature Series Tractor 9075M 60-in. (152-cm) HC Mower Deck (SN 030,001-).

Order:

  • BM25258 MulchControl attachment (60 HC)
Mower deck attachability
X758 Tractor driving onto high-capacity mower deckX758 Tractor driving onto high-capacity mower deck
#

High capacity (HC) mower decks have ramps positioned on top of the deck for easy installation:

  • On a four-wheel drive (4WD) tractor, the operator can simply drive onto and over the deck.
  • On a two-wheel drive (2WD) tractor, the operator must back onto and over the deck.

To remove the mower deck:

  • Disconnect the drive shaft.
  • Unlock the draft arm locks.
  • Back or drive the tractor onto and off the mower deck.
    • On a 4WD tractor, the operator can simply back onto and off the deck.
    • On a 2WD tractor, the operator can simply drive forward onto and off the deck.
Optional AutoConnect™ drive (BM23894)
X758 Tractor driving onto high-capacity mower deck with AutoConnect optionX758 Tractor driving onto high-capacity mower deck with AutoConnect option
AutoConnect option installed on X758 TractorAutoConnect option installed on X758 Tractor

AutoConnect drive is an optional kit that will automatically connect or remove the drive from the mower deck to the tractor's mid power take-off (PTO) shaft.

 

The AutoConnect drive does not need to be removed from the tractor when using front-powered equipment.

 

Drive-over mower quick reference (major steps)

John Deere has designed a system that makes it easy to remove and reinstall the mower deck. A few steps need to be followed carefully to ensure success.
 
The list below includes the major steps. Refer to the operator’s manual for a more detailed procedure. The tractor most likely has the mower already installed, so these steps begin with the removal procedure.

DRIVEJD - Always Dependable Product

 

                                                                 Mower removal steps

Drive tractor to level area

 

Ready mower deck

  • Adjust wheels and lower mower deck
  • Draft arms removed (front) and released (rear)
  • Power take-off (PTO): disconnect if manual PTO-connect system, then back-up to clear rear draft arms (If equipped with AutoConnect™, backing-up also disconnects the PTO)
    • Raise rear draft arms

 Increase engine speed, engage traction assist, and drive-over

 

                                                                 Mower installation steps

Verify tractor and mower are ready

  • Alignment of tractor and mower deck
  • Draft arms up
  • PTO in correct position (If manual PTO connect, place shaft in mower hanger)

 Engage traction assist, increase engine speed, and drive- or back-over

 

Join mower to tractor

  • Alignment and attachment verified and PTO connected
  • Draft arms hookup, front
  • Position mower wheels

Done! Set mower deck height and mow.

Frame is full-length welded steel for strength
Full-length welded steel frameFull-length welded steel frame

The full-length, welded C-channel steel frame provides plenty of strength to handle heavy equipment:

  • Frame side rails are formed from 7-gauge, 0.18-in. (4.6-mm) steel for extra strength.
  • The front bumper/weight bracket is formed from heavy, 0.375-in. (9.5-mm) steel.

The frame is robotically metal inert gas (MIG) welded:

  • Consistent welds for maximum strength
  • No bolts to come loose

A front Quik-Tatch weight bracket is designed into the frame:

  • Provides a convenient way to add 168 lb (76 kg) of weight to the front of the tractor using four suitcase weights
  • Extends ahead of the hood to act as a bumper
Optional receiver hitch and hitch ball shownOptional receiver hitch and hitch ball shown

The front receiver hitch is designed into the frame:

  • Excellent for positioning trailers, boats, etc., in tight quarters

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereX750 Signature Series Lawn Tractor
Add Model
Add Model
Engine
Power 24 hp
17.9 kW
Displacement 60.6 cu in.
993 cc
Manufacturer/model 3TNM74F
Type Diesel, overhead valve, full-pressure lube, oil filter
Cylinders Three, cast-iron liners
Governor Mechanical
Choke/speed control One lever
Cooling method Liquid
Air cleaner Paper dry-type with primary and secondary elements
Oil drain No tools
Fuel system
Type Diesel
Fuel delivery In-line indirect injection
Fuel gauge Gauge on dash
Fuel tank location Rear
Fuel fill opening On left fender, 3 in.
7.6 cm
Fuel tank capacity 5.2 U.S. gal.
19.7 L
Electrical system
Battery 12 V
500 CCA
Charging system Engine-mounted alternator, regulated, 40 amp
Engine starter Solenoid shift
Hourmeter Yes
Headlights Two standard, halogen, 37 W
Taillights or reflector Taillights
Backup lights Yes
Rear work lights Yes
12-V outlet Yes
Transaxle
Type K90 hydrostatic integrated with transaxle
Control Twin Touch™ pedals
Cruise control Yes
Oil cooler Yes
Oil filter Replaceable suction side 10 micron
Differential lock Standard
Forward speed 0-8.5 mph
0-13.7 km/h
Reverse speed 0-6 mph
0-9.7 km/h
Brakes Internal wet disc
Chassis
Frame Welded heavy-duty
Primer/paint E-coat/powder
Weight bracket Standard front - holds up to four Quik-Tatch weights, 42 lb
19 kg
Receiver hitch Yes, front
Front axle JDM BA8 nodular iron casting
Spindle bushings Metal, replaceable
Front tires 18x8.5-8 turf
Rear tires 26x12-12 turf
Hood material Noryl GTX902, painted
Fender deck material RIM with in-mold paint
Floor mats Sure-grip rubber
Storage Covered toolbox
Service interval decal Yes
Fender handles/grips Handles
Cup holder Yes
Equipment mounting Optional category 1 3-point hitch
Steering
Type Hydraulic power
All-wheel steer Not available on this model
Steering wheel 14 in.
35.6 cm
Tilt steering wheel Standard, six position
Turning radius 25 in.
63.5 cm
Uncut circle radius 54 HC, 32 in.
63.5 cm
60 HC, 28 in.
71.1 cm
Seat
Type Two piece professional high back
Seat back height 21 in.
53.3 cm
Armrests Optional
Fore-aft adjustment While seated, slide rail, 14-position, 7 in.
17.8 cm
Seat suspension Six-position parallel arm
Lift system
Type Two-function hydraulic
Hydraulic outlets Four, standard
Mower cut height 1-5.25 in.
2.5-13.3 cm
Cut height increments 0.25 in.
0.64 cm
Preset cut height Yes
Mower deck
Type Side discharge
Cutting width 48, 54, 60 in.
122, 137, 152 cm
Construction Stamped steel deck shell
Mower deck material 48A, 10 gauge
0.135 in.
3.4 mm
54 HC and 60 HC, 9 gauge
0.15 in.
3.8 mm
Mower wash port Yes
Mower drive system Hydraulic clutch, shaft
Mower wheels Four
Mower wheel adjustment Spring-loaded pin
Mower level adjustment Exact Adjust ports and onboard deck-leveling gauge
Mower attachability
Type Roll under tractor (48A)
Drive-over deck (54, 60 HC)
Front draft arms Overcenter
Rear draft arms V-align
Mower wheels rotate Yes, 90 degrees for easy mower removal (48X), N/A (54 HC, 60 HC)
Drive system Shaft or AutoConnect
Safety
Meets ANSI standard Yes
Meets OPEI standard Yes
Backup protection Reverse Implement Option (RIO)
Safety video Yes
Buyer's notes
Notes Hydraulic modulated PTO clutch for smooth mower and implement engagement
One-piece hood for easy engine access
540 rpm rear PTO and 3-point hitch options available
Warranty 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers 48A, 54 HC, 60 HC
Rear bagger 7, 14, 19 bu
250, 500, 670 L
Powered material collection Power Flow, 7, 14, 19 bu
250, 500, 670 L
Mulching system Yes, MulchControl™
Front thatcher 38, 46, 54 in.
96.5, 116.8, 137.2 cm
Front blade 54 in.
137.2 cm
Mid-mount blade
Snow blower Two-stage, 47, 54 in.
119.4, 137.2 cm
Rotary broom 52, 60 in.
132.1, 152.4 cm
Rotary tiller 42, 48 in.
106.7, 121.9 cm
Sleeve hitch
3-point hitch Category 1
Rear power take-off (PTO) 540 rpm
Plow, moldboard Adjustable, 8-14 in.
20.3-35.6 cm
Box scraper 48 in.
121.9 cm
Cultivator Adjustable, 30-46 in.
76.2-116.8 cm
Rear blade 60 in.
152.4 cm
Disk harrow Adjustable, 42-52 in.
106.7-132.1 cm
Landscape rake 60 in.
152.4 cm
Sprayer Tow-behind, 15, 25, 45 U.S. gal.
56.8, 94.6, 170.3 L
Mounted, 25 lb
94.6 L
Spreader Tow-behind, 125, 175 lb
57.7, 79.4 kg
Mounted, 125 lb
57.7 kg
Front bumper Standard bumper/weight bracket
Brush guard Yes
Weather protection Hard-side cab, weather enclosure
Sun canopy
Rear receiver hitch 1.25 x 1.25 in.
3.18 x 3.18 cm
Bucket holder Yes, double bucket
Grass striping Grass groomer kit, 48-in. (122 cm) mower only
Tractor shovel 54 in.
137.2 cm
Front loader Not available
Other equipment
Tow-behind tools 21
Dimensions
Height 51.2 in.
130 cm
Overall length 75 in.
190.5 cm
Wheelbase 54.5 in.
138.4 cm
Width with mower 48A, 62.5 in.
159 cm
54 HC, 64.5 in.
163.8 cm
60 HC, 74 in.
188 cm
Width with mower (deflector raised for storage) 48A, 53.6 in.
136 cm
54 HC, 57.5 in.
146.1 cm
60 HC, 62 in.
157.5 cm
Width without mower 47 in.
119.4 cm
Weight No fuel or mower, 948 lb
430 kg

Accessories and Attachments

Ballast Box

Ballast box (Category 1, 3-point hitch) - BW14313
Ballast box, Click-N-Go (X400/X500 HDGTs, X700s) - BM20715

Carts

Utility Cart, 7P Poly - LP21935
Utility Cart, 8Y Convertible Poly - LP22755
Utility Cart, 10P Poly - LPPCT10JD
Utility Cart, 13 Steel - LPHDC13JD
Utility Cart, 16YS Swivel Poly - LP68186
Utility Cart, 17P Poly - LPPCT17JD
Utility Cart, 18 Steel - LPHDC18JD
Utility Cart, 21 Steel - LPUT21JD

Cold Start Packages

Engine Block Heater Adapter - MIA881629
Engine Coolant Heater (110 V) - AR87167

Drawbar

Ball Mount, 2 in. (51 mm) - PM05201
Ball mount, 1 7/8 in. (48 mm) - PM05101
Drawbar, 1.25 in. (38 mm) - BM23989
Magnetic hitch pin - LP63768
Rear receiver hitch kit - BM20877

Fenders

Front fender kit (X710, X730, X750, X940) - BM24429

Front Power Take-Off (PTO)

2000-rpm front PTO (X400 and 2-wheel drive X700s) - BM25304

Front Quick-Hitch

Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) - BM26236
Hydraulic retro kit - BM20896

Home Maintenance Kits

Home maintenance kit (Diesel) - LG260

Hydraulic Angling

Hydraulic angling (X400/X500 HDGTs, X700s, X940s) - BM25609

MCS Chutes

MC542 Mower Deck Boot Kit (48A) - LP65063
MC542 Mower Deck Boot Kit (48X) - LP23080
MC542 Mower Deck Boot Kit (54 HC) - LP44079
MC542 Mower Deck Boot Kit (60 HC and 60D) - LP23082
Power Flow chute (14 bu) - BM21682
Power Flow chute (6.5/7 bu) - BM21681
Power Flow chute (MC519 with C, X, or A Series Blowers) - BM20855

MCS Hoppers

14-bu (493-L) 3-Bag Hopper Assembly (X400/X500 HDGT and X700 Series) - BM20671
20-bu (705-L) Click-N-Go™ Material Collection System - LP68577
7-bu (247-L) 2-Bag Hopper Assembly (X400/X500 HDGT and X700 Series) - BM20780
Loose knit bag (1) for 7-bu Hopper - AM135486
MC519 Material Collection System - LP49228
MC519 Operator's Manual and Attaching Parts for X400/X500 HDGT and X700 Tractors - LP52039
MC542 Hose Kit - LP39450
MCS 14 Dump-from-Seat Hopper, X500 and X700 with 14-bu (493-L) Hopper - LP47170
MCS 8 Dump-from-Seat Hopper, X500 and X700 with 7-bu (247-L) Hopper - LP47169

MCS Power Flow Blowers

48A High-Performance Power Flow (X700 Signature Series) - BG20859
48C/48X High-Performance Power Flow blower (X300/X500 M-T/X700) - BM22696
54 HC High-Performance Power Flow (X700 Signature Series) - BG20867
60 HC High-Performance Power Flow (X700 Signature Series) - BG20727
Power Flow Bracket Kit - BG20752

Miscellaneous

54-in. (137-cm) Tractor Shovel - LP54000
55-amp alternator - LVB25015
55-amp alternator harness kit - BM25347
Battery charger and maintainer - TY25866
Bucket holder (double) - LPJD301
Bucket holder (double) with buckets - LPJD301W
Bucket, 5 gal. (19 L) - LPJD400
Click-N-Go Bracket (X400/X500 HDGTs, X700s) - BM20714
Front light kit - BM20753

Mower Decks

Dry-condition kit (48A) - BM26238
Front roller kit - BUC10313
Grass Groomer (48A/54A) - LP63761
Grass Groomer (54 HC/60 HC) - LP46468
Leaf bagging kit (48C or 48X Mower) - BM19894
Mower deck leveling gauge - AM130907

Mulch Kits

48A MulchControl attachment - BM24993
54 HC Mulch kit - BM23977
54" High Capacity MulchControl Kit - BM26300
60 HC Mulch kit - BM23978
60" High Capacity MulchControl Kit - BM25258
Mulch kit (48C/48X) - BM20007

Protection

Front brush guard kit (X710, X730, X734, X738, X739, X750, X754, X758, X940, X948, X949) - BM24375
Protective cover, large deluxe - LP93647
X700 Signature Series Seat Cover - LP47913

Rear Hitch

3-point hitch (Category 0) - BM17327
3-point hitch, limited Category 1 (X400/X500 HDGTs, X700s) - BM23882
Adaptor kit, X400/X500 HDGT 3-point hitch on X700s - BM23883
iMatch Quick Hitch Bushings - LVU12858
iMatch Quick-Hitch Category 1 with adjustable top hook - LVB25976

Rear Power Take-Off (PTO)

540-rpm rear PTO (X700s, June 2010 and later production) - BM23588

Rear Wheels and Tires

26x12-12 rear HDAP tires - BM26280
26x12-12 rear bar tires - BM18369
26x12-12 rear turf tires - BM18370

Seat

Air-Ride Suspension Seat - BM24379
Arm Rest Kit - BM24426

Spanish North American Kit

Spanish label and operator's manual kit - BM25303
Spanish label and operator's manual kit - BM25307
Spanish label and operator's manual kit - BM26295
Spanish label and operator's manual kit - BUC10199
Spanish label and operator's manual kit (X700 Diesel) - BM24365
Spanish label and operator's manual kit (X700 Diesel) - BM25022

Spark Arrester

Spark Arrester Screen for Muffler - AM108146

Sprayers

3-Point Hitch High Performance Sprayer, 45 gal. (170 L), requires LP22884 or LP22885 boom - LP22886
High Performance Sprayer Precision Boom (12.5 ft) - LP22885
High performance boomless nozzles - LP22884
Mounted Sprayer, 25-gal. (95 L) (X400/X500 HDGT/X700) - LP22862
Tow-Behind High Performance Sprayer, 45 gal. (170 L), requires LP22884 or LP22885 boom - LP39963
Tow-Behind Sprayer, 15 gal. (57 L) - LP19478
Tow-Behind Sprayer, 25 gal. (95 L) - LP19479
Tow-Behind Sprayer, 45 gal. (170 L) - LP20485
Tow-behind sprayer wiring harness extension (X400/X500 HDGTs, X700s, 322, 330, 332, 425, 445, 455) - AM105666

Spreaders

Drop Spreader, 4.5 cu. ft. - LP53522
Mounted Electric Broadcast Spreader, 125 lb (57 kg) (X300/X500 M-T/X700) - LP35439
Mounted electric broadcast spreader barrier shield - LP23117
Pull-Type Spin Spreader, 125 lb (57 kg) - LP25353
Pull-Type Spin Spreader, 175 lb (80 kg) - LP25354
Tow-Behind Aerator-Spreader, 40 in. (102 cm) - LPAS40JD
Tow-Behind Broadcast Spreader, 130 lb (59 kg) - LP39087
Tow-Behind Broadcast Spreader, 175 lb (80 kg) - LPBS36JD

Thatchers

38-in. (97-cm) Front Thatcher (Center) - LP48004
8-in. (20-cm) Front Thatcher (Extension) - LP48003
Thatcher Mounting Frame (X700) - LP47977
Tow-Behind Thatcherator, 40 in. (102 cm) - LPTA40JD

Tire Chains

TerraGrip traction belts (pair) for 26x12-12 tires - LP39860
Tire chains (pair) for 26x12-12 tires - TY15958

Tow Behind

Lawn Sweeper, 42 in. (107 cm) - LPSTS42JD
Lawn sweeper dethatcher kit - LP42108
MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - LP39089
Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - LPPRT36JD
Tow-Behind Lawn Roller, 24 x 48 in. (61 x 122 cm) Steel - LP64738
Tow-Behind Plug Aerator, 40 in. (102 cm) - LPPA40JD
Tow-Behind Plug Aerator, 48 in. (122 cm) - LPPA48JD
Tow-Behind Spiker Aerator, 40 in. (102 cm) - LPSAT40JD

Weather Enclosures

X700 Signature Series Weather Enclosure - LP41114

Weights

30-lb (14-kg) Wheel Weight (1), cast iron, 8-in. front wheel - BM17964
50-lb (23-kg) Wheel Weight (1), cast iron, 12-in. rear wheel - BM17972
50-lb (23-kg) Wheel Weight (1), plastic, rear 12-in. wheel, with mounting hardware - BM17976
70-lb (32-kg) Starter Wheel Weight (1), cast iron, rear 12-in. wheel - UC13499
72-lb (33-kg) Starter Wheel Weight (1), cast iron, rear 12-in. wheel - BM17973
9-weight front weight bracket - BM24363
Mounting hardware (1) for attaching 72-lb (33-kg) Starter Weight and (2) 50-lb (23-kg) Cast-Iron Weights on 26-in. Tire - BM18101
Mounting hardware (1) for attaching 72-lb (33-kg) Starter Weight on 26x12-12 Tire - BM18089
Mounting hardware (1) for attaching two 50-lb (23-kg) Weights on 23-in., 24-in., or 26-in. Tire - BM17977
Quik-Tatch Weight, 42 lb (19 kg) - UC13263
Rear Click-N-Go weight bracket (X400/X500 HDGTs, X700s, X940s) - BM20779
Wheel weight mounting hardware for attaching one front wheel weight - BM17978